Specifications

Presetting stations using the remote control - DAB and FM

You may store your preferred DAB and FM radio stations to the preset

station memories. There are 20 memory presets in your radio, 10 for DAB

and 10 for FM. Presets are remembered by your sound system in the event

of a power failure.

The procedure for setting presets and using them to tune stations is the

same for FM and DAB modes, and is described below.

1. Press and release the On / Off button to switch on the sound system.

2. Press the Function button to select the desired waveband DAB or FM.

3. Tune to the required station as previously described.

4. Press and hold down the required Preset button until the display shows,

for example 'P 1 SAVED'. The currently tuned station will be stored under

the chosen preset button.

5. Presets 6 to 10 are obtained by breiﬂ y pressing the +5 button and then

pressing and holding Preset button 1 to 5. e.g. preset 7 can be set by

brieﬂ y pressing the +5 button then pressing and holding Preset button

2 until the display shows 'Preset 07 SAVED'.

6. Stations which have been stored in preset memories may be overwritten

by following the above procedure.