Specifications

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

DAB Radio

Operating your sound system - DAB

1. Fully extend the wire aerial.

2. If your sound system is in standby mode, press the On / Off button

to switch it on.

3. Press and release the Function button until the DAB mode is selected.

The display will show 'DAB' and then 'Tuning' for a few seconds.

4. If this is the ﬁ rst time the sound system is used a quick scan of UK Band

III DAB channels may be carried out (depending on whether scanning

was already completed in standby mode). If the sound system has

been used before the last used station will be selected.

5. The ﬁ rst station in the list of stations found will be played. The display

will show the station name. When the auto tune is complete the ﬁ rst

station (in numeric-alpha order 0...9...A....Z) will be selected.

6. If the station list is still empty after the Autotune your radio will display

'No DAB'.

7. If no signals are found it may be necessary to relocate your sound

system to a position giving better reception, and then repeat the scan

using the Auto-tune facility (see Finding new stations on page 14).

Note: that the radio station name and frequency displays shown in this

user guide may differ from those that you see on your radio. Broadcasters

may change radio station names that are transmitted, and the frequencies

used for DAB and FM radio stations may not be the same in all parts of

the country.