Phau Ntawv Qhia
Assembly of speaker stand for column speakers
1. Use two cylinder head screws
⑥
to screw the tube
①
securely onto the base plate
⑧
. Align the tube so that the
bolt (a) is facing forward.
2. Run the speaker cable through the hole in the base plate
⑧
and through the tube
①
until it extends somewhat out
of the tube on the top.
3. Now run the speaker cable through the second tube
②
from below until you can pull the speaker cable out of the
upper opening.
4. Push the tube
②
all the way into the tube
①
. Make sure
that the large oval openings in the tube
②
are facing to the
back.
[
①
⑧
⑥
②
①
②
①
②
①
⑧
a