INSTRUCTION BOOK FOR Picture King®
Important Parts Of Your Da-Lite Screen Setting Up Your Screen (When ordering parts, please specify screen model and size.) 1. 1 2 3 4 Hold screen vertically with tripod just above floor. With toe, press straight down on toe release plate. Tripod legs will glide open. 2. Pull out Black Locking Knob at top of bottom tube. 19 5 6 7 8 18 17 9 10 16 3. Raise extension tube to first position, and then swing case to horizontal position. 4. Raise screen surface and pull bail over hanger.
Closing The Screen 1. Return screen case to original central position on center tube. 2. Hold extension tube firmly. Pull out top Black Locking Knob and lower extension tube to bottom position. 3. Unhook screen pull bail and complete re-rolling fabric into case. 4. If Keystone Eliminator has been used, simply raise it to a perpendicular position and push it back into the extension tube. 5. Swing case to vertical position. Note that fabric locks in. 6. Set tab on hanger in opening of case end cap.
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite's instructions and are not damaged due to improper handling or treatment after shipment from the factory.
