HANDLING AND CARE OF Polacoat In-Wall Rear Projection Screens
Handling NEVER LAY FLAT The shipping crate must always be shipped, stored and handled in an upright position. Exercise caution while unpacking so as not to abrade, scratch or mar the screen surfaces. It is best to handle projection screens by their edges only and wear clean cotton gloves. Unpacking 1. All crates should be opened and screens inspected for concealed damage within five days of receipt. Failure to do so will render insurance null and void. 2. Open crate on the uncoated panel side first.
Unframed Glass Screens Glass screens should be mounted according to standard glazing practices for indoor installation only by those possessing proper knowledge and tools. Use suction cups only on the polished side. Slings may be used with larger screens. Clearance And Bite Recommended clearance and bite are listed in Figure 1 and vary with the thickness of the glass. These recommendations should be strictly adhered to in design and glazing.
LIMITED TEN YEAR WARRANTY ON DA-LITE POLACOAT IN-WALL REAR PROJECTION SCREENS Milestone AV Technologies LLC warrants this Da-Lite branded product to the original purchaser only, to be free from defects in materials and workmanship for a period of ten (10) years from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite’s instructions and are not damaged due to improper handling or treatment after shipment from the factory.
