manual

Ceiling Mount Pipe Stabilizer

Form E-362

Rev. 08 / 10

Caution:

This product is designed for ceiling

installation only. Qualified personnel using the ap

propriate

fasteners should mount the Pipe Stabilizer. The surface to

which this unit is mounted must be capable of supporting

a static load of four times the combined weight of the

projector and mount. Do not attach to plaster or drywall

alone.

Required Tools:

- 7/16” wrench

9/16” wrench

Phillips screwdriver

Procedure

1. Remove contents from carton and examine for damaged or missing parts.

PAGE 1
Ceiling Mount Pipe Stabilizer CM-PS Form E-362 Rev. 08 / 10 Caution: This product is designed for ceiling installation only. Qualified personnel using the appropriate fasteners should mount the Pipe Stabilizer. The surface to which this unit is mounted must be capable of supporting a static load of four times the combined weight of the projector and mount. Do not attach to plaster or drywall alone. Required Tools: - - 7/16” wrench 9/16” wrench Phillips screwdriver Procedure 1.
PAGE 2
. Due to the various ceiling constructions, careful consideration should be given to the selection and use of fasteners. For a listing of available fastener kits refer to the chart below. Ceiling Construction Concrete Wood Joist Metal Joist Fastener Kit Model Number A101 (3/8” cap screws & hollow set drop-in anchors) A105 (3/8” lag screws) A111 (3/8” cap screws & nuts) 3.