Manual

PROFESSIONAL ELECTROL INSTALLATION
3
CEILING TYPE HANGER
PICTURE
SURFACE
PICTURE
SURFACE
1" x 3" CLEAT
2" MOULDING
CEILING MOUNT
WITHOUT HANGERS
Screen case is placed flush with
the wall and ceiling and held in
position by moulding securely
attached to the wall.
RECESSED ABOVE CEILING
Other methods of installation
will suggest themselves in new
buildings where it would be an
easy matter to provide a recess
for the screen to conceal it when
not in use.
Do not seal in—allow access.
PICTURE
SURFACE
RAFTERS
WALL OR CEILING MOUNT
WITH HANGERS
Wall type hangers and ceiling type
hangers are standard equipment. One
set is supplied with each screen. Useful
for recessed installations.
WALL TYPE HANGER
FOR EXPOSED INSTALLATION
If the screen is to be mounted in an exposed
position, it may be covered with finished ply-
wood, veneer, paneling, plastic wall covering or
a valance.
PICTURE
SURFACE
SUGGESTED METHODS OF INSTALLATION
Length = Fabric Width
+10", All Sizes
Electrical
Outlet Box
5"
5"
9-1/2"
11-5/16"
Reinforced
Top
Motor End
Motor In The Roller
Screen Without Doors
Length = Fabric Width
+10", All Sizes
Electrical
Outlet Box
5"
5"
10-3/4"
12-9/16"
Reinforced
Top
Motor End
Motor In The Roller
Screen Without Doors
SCREENS UP TO 18' WIDE SCREENS 20' AND WIDER