Manual

PRE-INSTALLATION
1
1. Carefully unpack screen.
2. Make sure to recheck measurements of screen location before installation.
3. Remove instruction cover plate (Fig. 2). Do not remove wrapping paper or tape strips until screen is installed.
IRONING BOARD
Professional Electrols, 14' and over, contain an ironing board to flatten the fabric (long strip attached). The ironing board is
part of the screen case. Do not remove or alter (Fig. 1).
INSTALLATION
FIGURE 1 FIGURE 2
TAPE STRIP
CASE
IRONING BOARD
INSTRUCTION COVER
11
1
⁄2"
CASE LENGTH ÷ 2
11
1
⁄2"
11
1
⁄2"
11
1
⁄2"
(CASE LENGTH - 23") ÷ 3
(CASE LENGTH - 23") ÷ 3
(CASE LENGTH - 23") ÷ 3
CASE LENGTH ÷ 2
SCREENS 22' WIDE AND UNDER
SCREENS OVER 22' WIDE
FIGURE 3
Hangers (If required)
1. See Figure 3 for hanger placement.
2. Make sure hangers are placed to fit into notches of ironing board.