Quick-Start Guide
3
Assembly Instructions for Screens with 24” Marker Tray
1. Carefully unpack unit and place assembly on top of the clean
work area. The viewing surface must face up.
2. Center aluminum tray to the bottom of frame and attach with (3)
of the provided #8 x ½” screws. Insert screws through the tray into
the groove (Figure 1).
#8 X ½" Screws
Figure 1
Cleaning
Everyday Cleaning: The supplied foam eraser can be used to clean marks on the screen surface made by everyday dry erase marker
usage. Do not use spray cleaner in combination with the foam eraser.
Thorough Cleaning: For periodic full screen cleaning or to clean persistent marks from dry erase markers, use the supplied Da-Lite
spray cleaner and cleaning cloth. Use clean or dry sections of the microiber cloth when erasing the screen. This is important to prevent
smearing on the screen while cleaning. To clean permanent markers and other unintentional marks on the surface, use the supplied
foam eraser or the Da-Lite spray cleaner and cleaning cloth.