TABLE OF CONTENTS IMPORTANT SAFETY GUIDELINES....................................................1 CRITICAL SAFETY INFORMATION.....................................................2 IMPORTANT CO2 & HPA AIR TANK SAFETY GUIDELINES...............3 GETTING STARTED.............................................................................4 MAINTAINING YOUR VERT3X PAINTBALL MARKER.........................5 TROUBLE SHOOTING.........................................................................
IMPORTANT SAFETY GUIDELINES • The VERT3X paintball marker is not a toy. Misuse may cause serious injury or death. • Always remove the air source and all paintballs from the paintball marker, before disassembly or for maintenance. • Please read, understand and follow the instructions in the VERT3X Owner’s Manual. • Do not exceed 82.74bar (1200psi) input pressure. • D3FY SPORTS recommends the customer be 18 years of age or older to purchase this product.
CRITICAL SAFETY INFORMATION D3FY SPORTS reminds the user that Safety is Your Responsibility. Protect your eyes, face and ears at all times. Never shoot or point the VERT3X marker at a person that is not in designated paintball facility and without the proper Eyes/Face/Ears protection designed specifically for the sport of paintball and meets ASTM/CE specifications.
IMPORTANT C02 & HPA AIR TANK SAFETY GUIDELINES •Only use Co2 or HPA Air Tanks that are made for the sport of paintball •The Co2/HPA Air Tank can fly off with enough force to cause property damage, serious injury or death if the Valve unscrews from the cylinder head. LOOK at the Valve when removing the tank from the marker. Be sure that the valve is turning with the tank rather than remaining stationary with the marker’s ASA.
GETTING STARTED 1. Make sure the Safety Button (I-40) is on the “SAFE” position. Push the safety button from the “PUSH SAFE” side of the trigger frame. 2. Attach a barrel blocking device (X-02) on the tip of the barrel. 3. Install a Co2/HPA air tank. Firmly screw the air tank clockwise into the markers ASA (X-18). Tip: Make sure the tank is full and has a urethane o-ring on the valve to prevent an air leak. Note: Co2/HPA air tank is not included.
MAINTAINING YOUR VERT3X PAINTBALL MARKER 2. Pull upward on the Bolt Cocking Pin (I-05) to disconnect from the Striker. Remove the Delrin Bolt (I-04) by sliding it out the rear of the Receiver/Body (X-20). 3. Wipe off any dirt,debris, or paint from the Delrin Bolt using a clean cloth. Use a squeegee or swab to clean the inside of the Receiver. 4. Insert the Delrin Bolt with the open face in first.
and Striker from the rear of the Receiver. Tip: Only remove the Striker Plug with the marker in the un-cocked position. This will prevent the internals from springing out when the Striker Spring is compressed. 4. Insert the Delrin Bolt with the open face in first. Align the Bolt Cocking Pin with the Striker hole, and push down on the Pin to lock it in place. Note: The Striker Plug and Velocity Spring Guide will come out as one piece.
4. Once the Valve Plug is removed. Pull out the Valve Spring (I-01) and Cup Seal with Valve Pin (I-02). Note: Inspect the Cup Seal with Valve Pin for any signs of damage. Replace the Cup Seal with Valve Pin if experiencing an air leak out the barrel. Reassemble Front Internals 1. Attach the Valve Spring to the Cup Seal end first. Insert the Valve Pin end first and ensure it slides through the Valve Body. 2. Insert the Valve Plug with the O-ring end facing in first and the screw hole facing downwards. 3.
2. Dirt, debris, or paint is blocking the Breech. Solution: Clean Bolt, Barrel and Receiver. 3. Loader has dirt, debris, or broken paint. Solution: Clean loader. Note: Using low quality paintballs can cause them to break and/or get jammed in the marker. WARRANTY D3FY SPORTS INC. PROVIDES A (2) YEAR WARRANTY FROM DATE OF PURCHASE ON D3FY OEM PRODUCTS.
NOTES
VERT3X PARTS LIST LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 * 24 25 26 27 28 29 30 31 PART# X-21-B O-05 X-05 O-01 I-01 I-02 I-03 X-20-B/DB/T S-01 X-11(P) I-12 X-12(P) S-02 X-13(A) S-05 I-04 I-05 I-06 I-07 S-06 O-03 I-08 I-09 I-10 I-13 X-15 O-04 I-15 X-16 S-08 I-16 I-18 10 Ⅰ VERT3X PARTS LIST DESCRIPTION 30.48cm (12”) Barrel Barrel O-Ring (CS 1.5 x 17.
NOTES
www.D3FYSPORTS.
