User manual

Default Quality

Every time a LuSH-101 is loaded in the host application (new instance is created) the Default Quality value is used for

a Current Quality setting. Default Quality is stored within a conguration le of LuSH-101. This le is saved at the

moment of unloading any of active plug-in instances from the host application.

Current envelope retrigger mode

Allows to switch the envelope retrigger mode within polyphony = 1 voice (monophony) and within the set envelope

reset mode on Trig.

• Normal – When by using the MIDI keyboard we trigger sounds and hold them, then in every new MIDI note the

envelope is reset despite the fact that the earlier pressed notes were held. This is characteristic for the Trig reset

mode. Remember, when polyphony = 1 voice, only one note is always played from all the note notes pressed on

the keyboard. When we release the key responsible for playing the note, one of the earlier pressed notes will be

played. However, when we choose Normal mode (default for the Default Envelope Retrigger mode), releasing a

button does not result in resetting the envelope.

• SH-101 – This envelope retrigger mode was inspired by the manner in which the envelope was working in SH-101

synthesizer and it differs from Normal mode in one aspect. When successively releasing the pressed keys on the MDI

keyboard, not only does the played note change, but the envelope is also reset if it is switched to Trig reset mode.

Default envelope retrigger mode

Every time a LuSH-101 is loaded in host application (new instance is created) the Default envelope retrigger mode's

value is used for a Current envelope retrigger mode setting. Default envelope retrigger mode is stored within a

conguration le of the LuSH-101. This le is saved in a moment of unloading any of active plug-in instances from the

host application.

Conguration • Synthesis tab