User manual

69
Mixer • FX algorithms
3
• Join – This LED works only when Sync. is on. If Join is turned on, it means the delay lines for the right and
left channel are joined together and we set a delay time globally for both of them by setting a delay time
for the left channel only (L column).
• St.Spread – Stereo spread is a linear (additional) delay between the left and right channel. Therefore, if:
• Sync. Is Off – When the Delay effect is not synchronized with a host application, the maximal delay
between the left and right channel is 50% of the Delay time knob value.
• Sync. Is On – When the Delay effect is synchronized with a host application, the maximal delay value
between left and right channel is a half of the rhythmical value set in a L column.
• Feedback – Feedback value of the Delay effect.
The lter in a feedback loop is controlled by following parameters:
• Cuttoff – Cutoff frequency.
• Resonance.
• Filter Type – OFF (no lter), Lp (Low-pass lter), Bp (Band-pass lter), Hp (High-pass lter).
LED in the Delay's top bar works in toggle mode and is responsible for turning on and off the effect:
FX Delay - example 1
FX 2 - Delay - Top bar