User manual

49
Layer • Modulation Matrix
2
• Expression - Midi CC #11 (range [0..1]),
• Pitch Bend - Midi Pitch Bender (range [-1 .. 1]),
• Velocity - Midi Note velocity (range [0..1]),
• Pitch - Values (range [0..1]) of Pitch Tracking (see the Timbre settings chapter) assigned to each and every MIDI
note,
• Channel Pressure - MIDI Channel Aftertouch (range [0..1]),
• Sustain - Midi CC #64 / Sustain pedal (gets one of two values; {0,1})
• Arpe Gate - Gate step sequence from Layer's Arpeggiator (sequence has two-state steps and because of that
sequence, each step can have one of two values; {0,1})
• Arpe Tie - Tie step sequence from Layer's Arpeggiator (sequence has two-state steps and because of that
sequence, each step can have one of two values; {0,1})
By using the combo box in the Destination column we can select one from almost all available sound parameters of the
Layer.
In the Modulation Matrix a single controller (Source) can modify a few sound parameters (Destinations) at the same
time when few rows with same Source are added. Also a few controllers (Sources) can modify a single parameter when
a few rows with identical Destination are added.
Note: It should be remembered that in the case of selecting Velocity or Pitch as a Source in the Modulation Matrix, there will
be no access to all parameters in the Destination column, because both, Velocity and Pitch, are source controllers working per
voice, and some of the parameters affect all Layer voices (e.g.Insert effects parameters). To those kind ofparameters Velocity
and Pitch sources cannot be assigned.
On left upper corner of the Modulation Matrix there are four buttons devoted to basic editing actions:
- Adding a new row to a Modulation Matrix,
- Removing a selected row from a Modulation Matrix,