User manual
28
Layer • Synthesis
2
Next three parameters control sound pitch andits inuence on the lter's frequency:
• Range – Pitch transposition by whole octaves:
• 16' – Pitch non-transposed.
• 8' – Pitch transposed by +1 octave.
• 4' – Pitch transposed by +2 octaves.
• 2' – Pitch transposed by +3 octaves.
• Tracking – Turned on by default. When tracking is turned on, the pitch of incoming midi notes is taken into
account when a sound is generated. If we turn off the Tracking, the pitch of incoming midi notes is ignored
by LuSH-101 and the frequency is constant (controlled by Frequency parameter described below). In
consequence, no matter what key we press on the keyboard, the sound will have exactly the same frequency.
• Frequency – It is the absolute frequency of VCO (from 20 Hz to 8 kHz), this parameter works only when
Tracking is turned off (described above).
• Tracking Kybd. Affect – When Keyboard Affect is turned on, both parameters, Range and Frequency (when
Tracking is turned off), are taken into account by lter keyboard tracking.
Vco frequency tracking diagram