User manual

22
Layer • Synthesis
2
Low Frequency Oscillators - LFO
In the Layer there are two multipurpose low frequency oscillators, which parameters are located in sections LFO1 and
LFO2 on GUI:
Both LFOs can be used for controlling sound pitch, lter parameters, pulse width or sound amplitude.
There are two basic parameters for LFO:
• Waveform –We can choose one of six available waveforms:
• Triangle.
• Square.
• Sawtooth ascending.
• Sawtooth descending.
• Random.
• Noise.
• Rate – Denes the frequency of the LFO. There is an exception, namely Noise waveform, which is a white noise
and the Rate knob doesn't affect it.
Synthesis - LFOs