User manual

18
Layer • Synthesis
2
Supersaw
Two last sliders in the Source Mixer section and the LED above them are responsible for controlling the SuperSaw
mode for the Sawtooth oscillator.
Supersaw LED activates and deactivates that mode, and parameters:
• Amt. - Amount, the effect strength, the bigger the value is, the more saw oscillators are added.
• Detune – This is the detune value between additional saw oscillators.
Note: Please note that SuperSaw and HardSync cannot work at once. If you turn on HardSync mode, SuperSaw will be
automatically disabled.
Supersaw works alternatively to Sawtooth oscillator, therefore, the amplitude of Supersaw is controlled by
Sawtooth's volume fader in the Source Mixer section.
Supersaw parameters
Synthesis - source mixer