User manual

17
HardSync
Usually HardSync requires two oscillators. One of them restarts the period of the second one. Master – which has
constant frequency based only on note's frequency, Slave – which has frequency based on note frequency varied
by additional modulation sources (like envelope or LFO). Master restarts Slave's period. In LuSH-101 HardSync is
possible, because it uses implicitly the second hidden oscillator for PWM Square generator and Sawtooth generator.
HardSync can be controlled and activated in Pitch / Sync section on GUI (two last sliders on the right and the LED
above them).
• Sync – HardSync activation and deactivation
• Offset – Frequency offset of the slave oscillator
• Mix – This is a cross-fade between Slave oscillator and the mixed 50 / 50 Slave and Master oscillators.
When HardSync is enabled the pitch modulation (Mod fader in Pitch / Sync section) affects the Slave's oscillator
frequency only.
Layer • Synthesis
2
Noise type and waveform radio groups
Pitch / sync section