Installation & Assembly_2

• Once countertop hole is cut, set sink inside hole and center. Ensure sink flange sits flat

on top countertop.

• Before setting sink in countertop, prepare and attach drain to sink. Use silicone sealer

under drain flange. After tightening tailpiece remove excess sealer.

• Run a ¼” bead of silicon sealant inside of pencil line. Carefully set sink into countertop

hole and sealant. Once positioned, carefully remove excess sealant from the outside rim

of sink with a soft cotton rag while holding downward pressure on sink.

• Sink must set a minimum of 12 hours for sealer to dry before putting any movement or

pressure on sink.

Under Mount Installation for Flat Edged Sink:

• Measure inside diameter of sink. Subtract one inch from this dimension to achieve

countertop opening.

• Center sink on opening under countertop and trace pencil line around sink. Remove sink

and apply a bead of silicone adhesive or other suitable adhesive to the flat mating edge of

sink.

• Position sink under the countertop using your pencil mark as a guide and press upward

seating sink against the counter. Place some type of support under sink until adhesive

cures. Check for any excess sealer on inside of sink and remove immediately with a soft

cloth.

Care and Maintenance:

Caring for our copper bowls is surprisingly easy. Rinsing your sink with clean water and drying

with a soft cloth after each use will help keep your sink looking new. For cleaning use a liquid

dish soap and water with a non-abrasive sponge. Never use abrasive cleaners. Most copper sinks

are considered a “live” finish, meaning the patina (finish) will

change over time. If you ordered

the Dark Smoke finish, this patina will continue to darken over time as you use your sink giving

an “Old World” look. Do not use copper cleaners, abrasive materials or harsh chemicals on

this sink as this will remove the patina. If a chemical lightens the finish, don’t worry, time will

return the darker patina. For maintaining the Shiny Copper finish, copper cleaners or lemon juice

will restore it to its original luster. For added protection, paste waxes such as Flitz Furniture and

Faucet Wax or any quality automotive wax will help maintain the beauty of your sink as well as

help keep it clean.

Any questions with the installation, please call us at (877) 322-3600. We will be happy

to assist you.