Operation Manual

37
NEW SD Memory card initializing should be done using Tool menu.
STEP1. Insert new SD memory card into
the PC.
STEP2. Run “PC Viewer BX4000”
STEP3. Select [Tool] and then click
[SD Initialize]
We recommend the [SD initialize] at least
once per month to prevent the BX4000 from
any software errors. This is due to the
nature of Flash memory storage, especially
when a lot of data is being read & written on
a daily basis.
Drive Recorder Settings
Caution
Once the record setting was changed, all recorded
data in SD card will be removed automatically.
Select Backup [YES] or [NO] before lost the all
recorded data.
Initialize SD card : All data will be deleted and the configuration of Drive
Recorder will default to the factory settings.
Delete Record Data : All date will be deleted.