Operation Manual

Record Mode Normal Mode: Continuous recording will automatically
start after booting the BX4000.
Event Mode: Recording by Motion Detection, G-
sensor, Alarm1~3 or [PANIC] button.
Motion Sensitivity Select Motion Detection Sensitivity from 1 to 5.
5 (High): The most sensitive
4
3 (middle): Default value
2
1 (LOW): Insensitive
Drive Recorder Settings
To record Camera2 or Camera3, Camera4 check “Use” box.
To record Audio, check “Record Audio” box.
To use Motion Detection as an Event, check “Motion” box per camera.
32
To record by Motion Detection
Check Motion per camera and set Record Mode as Event Mode.
Dual Recording (If you set different record modes per camera)
Like camera1 set as Event record and camera2 set as Normal record, then
camera1(Event record) will work according to the record setting for
example 10frames per second recording, when there is a event. However
camera2(Normal record)will record 1frame per second, if there is no event.
If there is an Event, both cameras will record according to the record
setting for example 10 frames per second recording