Operation Manual

OPERATION
13
Press [PLAY] button then the INFORMATION OSD (the summery of setting)
will show up on the monitor as below,
To change the live display channel, press [PANIC] button.
The INFORMATION OSD will be turned off automatically after 30 seconds.
To turn off the live view, press [PLAY] button or [SHUTTER] button.
INFORMATION OSD
LIVE VIEW
CAM1 CAM2 CAM3
Activated
Record Mode
System : NTSC
Quality : Super
Overwrite : ON
G-Sensor Level : X:3, Y:3, Z:3
G-Sensor Calibration :
Firmware Version : 2.0.1
Current Time : 14:50:07 07 JUL 2011
Normal Normal Event
Resolution : 720X480
FPS : 5
Audio : ON
√ √
√
√
CAM4
Event
√
Turn on the BX4000 and press [PLAY] button to turn on the INFORMATION OSD
(the summery of setting) . To change the live display channel, press [PANIC]
button to select the camera. And then press [PLAY] or [SHUTTER] button to
escape.
CAM 1 => CAM 2 => CAM 3 => CAM4 => 4 Cameras together