Operation Manual

Drive Partner for your Safety
26
BX1000 / BX1000 Plus User Guide
www.d-teg.com
27
SETTING DRIVE RECORDER
14. Click [Recorder Setting] icon for setup.
[Recorder Setting] icon
Caution
BackuptheSDdatarst,
before clicking initialize
SDcard button.
Once done, the old data
cannot be recovered.
BACKUP EVENT/LOG FILES
13.Click[BackupEvent/Logles]icontobackupthelestothePC.
[BackupEvent/Logles]icon
Select[Eventdata]or[Normaldata]andselect[Logdata]rst,before
clickingthe[BackupEvent/Logles]icon.ThenselectedEventorNormalor
Log data list are on the Backup windows.
To backup the whole data from SD card to the PC, check [Backup All]
Recording Method
Event Record (Automatically starts Recording by
G-sensor event or Record Button)
Normal Record (Automatically starts continuous
Recording just after Power on)
Image Resolution 6
40x480(High), 320x240(Low)
Frame Rate
‘30’ fps means Real Time recording
Event Recor
d supports 10, 15, 30 fps
Normal Record supports 1, 5, 10, 15 fps
Image Quality
High
(Largelesize,butgoodpicturequality)
Low(Smalllesize,butlowpicturequality)
Event Record Time
This menu is for Event Record.
Pre-record/Post-record time can be set here.
Recording Mode
Overwrite (The image data is overwrites the oldest
les
whentheSDmemoryisfull.)
One time (The recording stops automatically when
the SD memory is full.)