User's Manual

E-24
E
1.10 OSD System Overview
MENUS FUNCTION DESCRIPTION
BRIGHTNESS Adjust the image brightness.
Setting the brightness too high will cause the image to bloom or flare, too
low will decrease the visible light
CONTRAST Adjust the image contrast.
Setting the Contrast too high or too low will causes loss of some greyscales.
PHASE Adjust the phase level.
Do not adjust manually - fine adjustment will occur automatically during
auto adjustment. When the phase value is wrong, the image may have
interference from “noise”.
CLOCK Adjust the sampling frequency.
Do not adjust manually - fine adjustment will occur automatically during
auto adjustment. When the frequency value is wrong, the horizontal image
may be the wrong size or have interference from “noise”.
BACKLIGHT Adjust the backlight dimming level. Setting the backlight too low will
cause a dark image and too high will decrease the backlight lifetime.
AUTO ADJUST Fit to the most appropriate screen on the D-SUB Analog signal.
SHARPNESS Adjusts the sharpness of the video image
SATURATION Changes the tone of the color
COLOR Change the tone richness of the color
COLOR TEMP
6500K
Default 6500K color setting
COLOR TEMP
5600K
Default 5600K color setting
COLOR TEMP USER Default 6500K color setting. When USER is selected, Red, Green and
Blue values are changeable by the user.
H POSITION Adjusts the Horizontal (left / right) position of the image. It will return to
the default state when executing AUTO ADJUST OR RESET SETTINGS