User's Manual

E-10
E
1.9 On-Screen Display Menus
1.9.1 DSUB ANALOG/RGBS Input Source
Adjust Menu
❶ BRIGHTNESS - Increase or decrease the
brightness (Range: 0~100).
❷ CONTRAST - Increase or decrease the contrast
(Range: 0~100).
❸ SATURATION - Changes the tone of the color
(Range: 0~100).
❹ COLOR - Changes the richness of the color
(Range: Green 0~50, Red 0~50).
➎ CLOCK - Increase or decrease the sampling
frequency (Range: 0~100).
➏ PHASE - Increase or decrease the phase level
(Range: 0~100).
❼ BACK LIGHT - Increase or decrease the back
light dimming level (Range: 0~100).
❽ AUTO ADJUST - Fit to the most appropriate
screen on the D-SUB Analog signal.
Color Temp Menu
❶ MODE - Change the color temperature mode:
6500K, 5600K, USER. When USER is selected, a
sub-menu displays allowing the user to adjust the
RED, GREEN or BLUE balance.
❷ RED - Red balance- Only works with USER mode
(Range: 0~100).
❸ GREEN - Green balance- Only works with USER
mode (Range: 0~100).
❹ BLUE - Blue balance- Only works with USER
mode (Range: 0~100).