User's Manual

ManualsBrandsD&T ManualsLED & LCD TVs52" DUAL COLOR TFT LCD MONITOR

User’s Manual

52” Dual Color TFT LCD Monitor

Model Name : FS-S5202C

Model Number : 0100400003AA

Customer Project name : Aquarius Dual

TANDBERG Page 1 of

Item number : Item name :

117336

TANDBERG Monitor Dual 52” Assembly Rev.:01-draft

Date Sign Changes : Rev 01

Init

Tech

App

First build of the specification

Vendor Vendor/Manufacturer Part No FS-S5202C 0100400003AA

Vendor/Manufacturer must guarantee that assembly is in compliance with RoHS directive(tick-off)

All contents are confidential

Do not copy

Summary of content (23 pages)

PAGE 1
User’s Manual 52” Dual Color TFT LCD Monitor Model Name : FS-S5202C Model Number : 0100400003AA Customer Project name : Aquarius Dual TANDBERG Item number : 117336 Date Page 1 of Item name : TANDBERG Monitor Dual 52” Assembly Sign Changes : Rev 01 First build of the specification Rev.
PAGE 2
INFORMATION TO USER : General Specification
PAGE 3
1. General Description and Scope 2.1 General Description This specification applies to the Type 52” Color TFT/LCD Module “LTI520HB01”. This module is designed for a LCD TV style display unit. The screen format and electrical interface are intended to support the VESA WUXGA (1920(H) ×1080(V) at 60Hz) screen. Supported Color is native 16.7M colors (RGB-8bit data driver). All input signals are LVDS (Low Voltage Differential Signaling) interface compatible. 2. Environmental and Reliability Specifications 3.
PAGE 4
3.2 Non-Operational Conditions 3.2.1 3.2.2 3.2.3 3.2.4 Temperature : -20℃~ 60℃ Humidity : 10% ~ 90%, non-condensing Altitude : maximum 15,000m Test Type Low temperature Parameters T = -20°C Dwell time = 16h Description and comments Results Passed High temperature T = +60°C Dwell time = 16h Passed Thermal shock Low temperature = -20°C High temperature = +60°C Temperature gradient = 5°C/min Dwell time = 2h No.
PAGE 5
3.3 Packing Conditions 3.3.1 3.3.2 3.3.3 3.3.4 Temperature Humidity Altitude Test Type Freefall Drop vibration Document No. : -20℃~ 50℃ : 10% ~ 90%, non-condensing : maximum15,000m Parameters Drop surface Drop height Impact area No. of drops Frequency range Displacement Acceleration Sweep rate Duration D&TQP0302-11(0) Result Passed Concrete or steel Weight > 100kg: 0.1m 6 faces 1 selected corner 1 selected edge 1 per impact area 5-10Hz 3.
PAGE 6
3. Input Signal and AC Power 4.1 AC Power 4.1.1 AC input voltage : AC 100 to 240 Volts (Universal power) 4.1.2 AC input frequency : 50~60Hz ±3Hz 4.2 Video and Sync Signal 4.2.1 Video signal A. Horizontal frequency : 25 ~ 90KHz B. Vertical frequency : 24 ~ 120Hz C. Applicable maximum pixel frequency : 170MHz(Analog), 165MHz(Digital) D. Maximum resolution : 1920x1200 / 60Hz 4.2.2 Signal connectors A. HDMI type Ax3x2(Dual) : HDMI input B. 15p D-Sub(Female, 3row) x1x2(Dual) : Analog RGB input C.
PAGE 7
5.3 LCD (Liquid Crystal Display) Panel Specifications This specification applies to the Type 52” Color TFT/LCD Module “LTI520HB01”. This module is designed for a LCD TV style display unit. The screen format and electrical interface are intended to support the WUXGA(1920(H) ×1080(V)) screen. Supported gray scales are native 8bit per 1(one) sub pixel. All input signals are LVDS(Low Voltage Differential Signaling) interface compatible. 5.3.
PAGE 8
N o rm al L in e φ = 0 o, θ = 0 o θ L θ θ L φ x =90o φ L R H y y* φL = 90o φ H = 90o x* θR =90o Definition of Response time : Black(TFT OFF) Display data Black(TFT OFF) White(TFT ON) TR Optical Response TF 100% 90% 10% 0% Time 5.3.
PAGE 9
5.4.3 Minimum luminance : less than 30cd/㎡ with full white pattern at the contrast default and minimum brightness and minimum back light level 5.4.4 Gray scale linearity : The 16 step gray bars shall be distinguishable at the default contrast and default brightness or 3 steps down contrast setting of the OSD menu 5.4.5 Noise : Pixel displacement, jitter, or swim shall not be visible to the eye when viewed at 50cm from the LCD panel surface. 5.
PAGE 10
5. Signal Connections and Pin Assignments 6.1 AC Inlet socket Pin 1 2 Signal Assignment 3 GND Live Neutral 6.2 HDMI Connector (Type A) Pin Document No.
PAGE 11
6.3 15pin D-Sub Connector : Analog RGB signal input Pin 1 2 3 4 5 6 7 8 Signal Assignment Red Green Blue GND DDC 5V Standby /Cable connection check GND-Red GND-Green GND-Blue Pin 9 10 11 12 Signal Assignment NC GND-Sync GND DDC SDA 13 H Sync 14 15 V Sync DDC SCL 6.4 9pin D-Sub(Female) Connector : RS232C Input Pin 1 2 3 4 5 Signal Assignment RS232 ID RS232 RXD RS232 TXD NC GND Pin 6 7 8 9 Signal Assignment NC NC +5V Output NC 6.
PAGE 12
Pin 1 2 3 4 5 Signal Assignment NC RS232 RXD RS232 TXD NC GND Pin 6 7 8 9 Signal Assignment NC NC NC NC 6.
PAGE 13
6. Supported Timing 7.
PAGE 14
Resolution Timing Item Pixel Clock (MHz) Sync Polarity (H/V) Scanning Type -Hor Frequency (kHz) -Period (us) -Active time (us) -Front porch (us) -Sync width (us) -Back porch (us) -Ver Frequency(Hz) -Period (ms) -Active time (ms) -Front porch (ms) -Sync width (ms) -Back porch (ms) Document No. 1920x1080 @60Hz 1920x1200 @60Hz 148.500 P/P Progressive 67.500 14.814 12.929 0.592 0.296 0.997 60.000 16.666 16.000 0.059 0.074 0.533 154.000 P/N Progressive 74.038 13.506 12.468 0.312 0.208 0.519 59.950 16.
PAGE 15
7. User control function 8.1 User Controls We will not provide remote controller, because no need to control the OSD function normally, but will provide it for service engineer to check the RS232C function easily. Following is the description how you can adjust or change the OSD function Function name POWER MENU SOURCE UP DOWN PLUS MINUS SET z Operation • Monitor power on and off • With OSD deactivated, Activated to OSD menu • With OSD activated, Exit from main menu or sub menu.
PAGE 16
8. Special Consideration 9.1 All the supported timing modes (includes LCD Panel mode) are described in chapter8. (Optimized with TANDBERG’s requirement signal timing) 9.2 This model have plug & play feature of DDC 1, DDC2B. This function is operating when the monitor is connected to a system compatible with VESA DDC standard. The DDC data structure is based on VESA DDC 1.3 standard 9.
PAGE 17
10. Entire system block diagram Document No. D&TQP0302-11(0) Revision No.
PAGE 18
11. Mechanical and printing Specifications This monitor is used for TANDBERG’s video conferencing system ‘EAGLE’. Following dimension and outward sharp is designed by TANDBERG originally. 16.1 Outward drawing and Weight Outward Size Weight 2412 X 170 X 867 mm Max 130Kg 16.2 Product label 16.2.1 Brand Logo : TANDBERG 16.2.2 Model No : FS-S5202C 16.2.3 Rating Label (This may vary based on the TANDBERG's request, and the changed contents of the Rating Label shall not be specified in this specification.) A.
PAGE 19
16.2.4 Product’s barcode label and Serial number structure A. Location : On the product label B. Tilt : Shall not be tilted more than 1mm C. Size : 70 x 11mm D. Material : Art paper E. Base Color : White F. Printing Color : Black G. Description: Serial No digit Item Initial 1 D This mean D&T Inc 2 9 Build year (7:2007, 8:2008, 9:2009~) 3 A Build month(A: January, B: February, ~L: December) 4 E Model (A : FS-L4201C, B: FS-S5201C, C: FS-P6501C, D: FSL4205C, E : FS-S5202C....
PAGE 20
16.3 Packing Specification (Full set 1unit) 16.3 1 Dimension Carton box (Outside, Full set 1 unit) Width Depth Height 1500mm 1100mm 1240mm 01 Page 16.3.2 Packing Weight & Volume Packing Weight(Max) Document No. Volume kg lbs m ft3 170 375 2.05 72.26 D&TQP0302-11(0) 3 Revision No.
PAGE 21
16.3.3 Cushion and inside view Document No. D&TQP0302-11(0) Revision No.
PAGE 22
16.3.4 A. B. C. D. E. F. BOX label Location : On the 2 narrow side of carton box (Refer to the following picture) Tilt : Shall not be tilted more than 3mm Size : 104 x 127mm Material : Art paper Base Color : White Description: G.
PAGE 23
16.5 Container loading 16.5.1 In case of 20ft container : 6 pallets= 18units 16.5.2 In case of 40ft container : 13 pallets= 39units Document No. D&TQP0302-11(0) Revision No.