TANDBERG TFT-LCD Color Monitor FS-S2201F User Guide General Specification
INFORMATION TO USER : General Specification
TABLE OF CONTENTS 1. Product Drawing------- ------------------------------------------------------------------------------1 2. Connector Specification- --------------------------------------------------------------------------2 3. Standard signal Table ------------------------------------------------------------------------------3 4. Signal Connector Pin Assignments------------------------------------------------------------4 5.
1.
2.
3. Standard signal Table PC Supported Mode Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Clock Frequency(MHz) PAL 15.6 50 13.5 NTSC 15.7 60 13.5 640x480 29.5 60 23.625 800x600 31.5 50 35.4375 800x600 37.879 60.317 40 800x600 46.875 75 49.5 720p(1280x720) 37.5 50 74.25 720p(1280x720) 45 60 74.25 720p(1280x720) 75 100 148.5 720p(1280x720) 90 120 148.5 1366x768 48.3 60 87.75 1280x768 47.7 60 79.5 1400x1050 65.317 60 121.751 1680x1050 64.
4. Signal Connector Pin Assignments 1. DVI1, DVI2 Pin No. Assignment Pin No. Assignment 1 TMDS Data2+ 11 Ground_Clock Shield 2 Ground_Data2 Shield 12 TMDS Clock- 3 TMDS Data2- 13 No Connection 4 TMDS Data1+ 14 No Connection 5 Ground_Data1 Shield 15 TMDS SCL 6 TMDS Data1- 16 TMDS SDA 7 TMDS Data0+ 17 Ground 8 Ground_Data0 Shield 18 TMDS Power 9 TMDS Data0- 19 Hot Plug Detect 10 TMDS Clock+ 2. RS-232 input(D-Sub 9Pin) 1 Pin No. Assignment Pin No.
5. Specification Model LCD PANEL Synchro nization Power Consumption Power Approval Mark& EMI Dimension FS-S2201F Type TFT Active matrix Screen size 22 inch (Diagonal) Maximum Resolution 1920X1200@60Hz Pixel pitch 0.247(H)mmX0.247(V)mm Display colors 16.7M (RGB 8-bit data) Contrast Ratio(Typ.) 1200 :1 Viewing Angle(CR≥10,Typ.) 89/89/89/89 Response Time(Typ.) 16ms Luminance(Typ.
