User's Manual

English - 98 - English
Servicing
Do not attempt to service the apparatus yourself as opening or
removing covers may expose you to dangerous voltages or other
hazards, and will void the warranty. Refer all servicing to qualified
service personnel.
Unplug the apparatus from its power source and refer servicing to
qualified personnel under the following conditions:
If the power cord or plug is damaged or frayed.
If liquid has been spilled into the apparatus.
If objects have fallen into the apparatus.
If the apparatus has been exposed to rain or moisture
If the apparatus has been subjected to excessive shock by being
dropped.
If the cabinet has been damaged.
If the apparatus seems to be overheated.
If the apparatus emits smoke or abnormal odor.
If the apparatus fails to operate in accordance with the operating
instructions.
Accessories
Use only accessories specified by the manufacturer, or sold with the
apparatus.
Classification
- Protection against electric shock : Class I
- Applied Parts : No Applied Parts
- Protection against harmful ingress of Eater : IPX0
- Degree of safety in the presence of flammable anesthetics mixture
with air or with oxygen or with nitrous oxide.
Not suitable for use in the presence of a flammable anesthetics
mixture with oxygen or with nitrous oxide.
- Mode of operation : Continuous.
Recycling :
Follow local governing ordinances and recycling plans
regarding the recycling or disposal of this requirement.
Cleaning Instructions :
Follow your hospital protocol for the handling of blood and
body fluids. Clean the display with a diluted mixture of
mild detergent and water. Use a soft towel or swab.
Use of certain cleaning agnts may cause degrandation to
the labels and plastic components of the product.
Consult cleanser manufacturer to see if agent is compatible
with it. Do not allow liquid enter the display.
EEC Safety Compliance:
This display unit meets the requirements of EN-60601-1 so as
to conform to the Medical Device Directive 93/42/EEC
(general safety information).
The monitor should be powered from a center tapped circuit when used
in the US at voltages over 120 volts. Monitor is intended for continuous
operation.(Using Plug for US: 120V rating -5-15P tYPE, 230V rating-6-
15P type)