User's Manual

Page | 11
Power Managements
Status LED Sign Power Consumption
Normal Operation Green Normal Power
Sleep Mode Green blink < 1 Watt
NOTE: Sleep mode will be entered by two conditions as below.
Sleep mode is only available when sleep enable function in service menu is enabled.
For default disabled, ask your service or administrator.
1) Entered by “soft-power switch” Turn off.
2) Entered by “Input H/V sync lost”.
“soft-power switch” should be turned on to return to the operation state
Adjusting OSD
On every page of OSD, the actual input source, resolution and frame rate are displayed.
VGA input sources
ADJUST
1. BRIGHTNESS
Increase or decrease the brightness (Range: 0~100)
Use of brightness adjustment limits the dynamic range
Prefer to use of LUMINANCE adjustment.
2. CONTRAST
Increase or decrease the contrast (Range: 0~100)
3. CLOCK
Increase or decrease the sampling frequency (Range: 0~100)
4. PHASE
Increase or decrease the Phase level (Range: 0~100)
5. LUMINANCE
Adjust backlight dimming level (Range: 0~100)
COLOR TEMP
1. MODE
Change the color temperature mode (Range: 0~100) (C1 (Reddish, 6500K),
C2 (Bluish, 9300K), USER)