User's Manual

Page | 10
OSD Buttons
Power LED
Green: Normal mode
Blink Green: Standby mode
Blink Green: Soft power-off
● On-Screen Display (OSD) Function Button
1. POWER: Turns ON/OFF the monitor.
2. MENU: With OSD deactivated, Activate the OSD menu.
With OSD activated, Exit from main menu or sub menu.
3. AUTO: Release the button (Auto Adjust): Fit to the most appropriate screen on the D-
SUB Analog signal.
Hold the button (Manual separate timing table): Change the timing
Table to another one which is having different timing except V Total
And H period.
If VGA Analog's picture size not matched with full screen size or image is noisy
Press the input button during 2~3 seconds then you can see the most
Appropriate screen.
4. UP: With OSD deactivated, hot key of the luminance control and increases the
luminance. With OSD activated, move the cursor upward.
5. DOWN: With OSD deactivated, hot key of the luminance control and decreases the
luminance. With OSD activated, move the cursor downward.
6. PLUS: With OSD deactivated, hot key of the contrast control and increase the contrast.
With OSD activated, enter sub menu and increases the adjustment of the
selected function.
7. MINUS: With OSD deactivated, hot key of the contrast control and decreases the
contrast.
With OSD activated, decreases the adjustment of the selected function.
8. INPUT: Change the display signal source.