User's Manual

TFT-LCD Monitor
4
 Introduction
- Connection to
Signal Source
<Power Source Connection> <Signal Cable Connection>
①
① Port for AC power cable.
② Port for BNC output.
③ Port for BNC input.
④ Port for S-VHS input.
⑤ Port for Audio input.
⑥ Kensington Lock.
⑦ Port for signal cable from signal source.
② ③ ④ ⑤ ⑥ ⑦
 General
 For Macintosh
Adapter for Macintosh(Optional)
Refer to the table on the rear side of
the optional Macintosh adapter and
adjust DIP switch by the resolution.
1. Use 220V or 110 V. (Free Voltage)
2. Connect monitor and Signal Source via Signal cable.
3. Power on the monitor and computer.
4. Connection is finished.
Basic Connection