Owner`s manual

24
MAINTENANCE
Regular Maintenance*
Wipe and clean RDL and Transmitter with a clean,
soft cloth and warm, soapy water after each use.
Take care not to use too much water when clean-
ing the Remote Receiver and Transmitter.
Dry off any moisture to prevent corrosion/rusting as
this may cause malfunction of the unit.
Regularly clean and oil the Ratcheting Cocking
Lever track and the Dummy Launcher firing shaft.
Follow Dummy Launcher maintenance directions in
the Dummy Launcher instruction manual.
During Use
Avoid placing the Launcher in extremely wet or
marshy conditions.
Never immerse Remote Receiver and Transmitter
in water or keep them out in rain.
If shooting dummy into water, dry the inside of the
dummy tube between launches.
Storing Your Launcher*
Keep Folding Legs in ‘closed’ position to keep the
springs from stretching.
Remove dummy and batteries from unit.
Do not stack anything on top RDL.
Do not store in extreme temperatures or humidity.
*WARNING - Make sure Launcher is not loaded with a
Power Load during maintenance and storage.