Owner`s manual

PARTS

FUNCTIONS CONT.

Vibration Buttons

(H20

182011 82211 823)

Pressing the button on the left (#I) of the transmitter

causes the collar to vibrate. Pressing the button to the

right

(#2) of the transmitter causes the collar to vibrate

for

112 second. After 112 second, continuous stimula-

tion will be applied simultaneously with the Positive

Vibration.

Jump Button

lH20

183011 83211 833)

Pressing the button on the left

(#I)

of the transmitter

causes the collar to administer a 'Jump' Stimulation.

This feature allows you to instantly "jump" to

prede-

termined intensity level (see p. 15).

Rise Button

(H20

183011 83211 833)

Pressing the button on the right (#2) of the transmitter

causes the collar to administer a stimulation that

gradually increases in intensity level the longer you

hold down the 'Rise' button.

Locate and RunlPoint Buttons

(H20

185011 85211 853 only)

Pressing the 'Locate' button on the left side (#I) of the

Transmitter will make the Collar Receiver beep.

Pressing the

'RunIPoint' button on the right side (#2)

of the Transmitter will activate the RunIPoint mode on

the Collar Receiver. Press it again and it will go into

the Point only mode. Press the 'Locate' button to can-

cel the

RunIPoint modes.