Owner`s manual

TESTING

There are three methods you can use to test your

EZT Super Trainer™

depending upon your model’s features.

First, you should make sure that both units are fully

charged. Then turn on the power to the collar receiver.

Next, follow these steps:

To Test the Electronic

Stimulation:

A) Place the tester firmly on

the electrodes of the collar

receiver.

B) Set the intensity (Note -

An intensity level setting of 4

or less might not be enough

to light the tester).

C) Push either the ‘NICK’,

‘STIMU’, Red buttons.

D) The tester light will

quickly flash for the Nick

function and light steadily

when the Constant Stimula-

tion or Constant and Vibration buttons are pushed. (The

higher the intensity, the brighter the test light).