Owner`s manual

PARTS & FUNCTIONS CONT.

Collar Belt with Embedded Receiver Antenna

The embedded collar antenna ends at the displaced hole

midway along the belt.

CAUTION

Do not cut the collar belt. Doing so will damage the an-

tenna and may result in

severely decreased receiver range.

Collar Indicator Light

When the ON/OFF button on the Collar Receiver is

pushed, the RED light will flash steadily once every two

seconds to indicate that the unit is active.

The RED light changes to a rapid flash (twice per second)

when the battery is low and in need of charging.

Electrodes

Electrodes should fit snugly on the dog’s neck to ensure

good contact with the skin. For more information on the

proper fit of the collar see page (7).

Remote Training EZT 2000 Series

For the EZT 2000 Series, pressing the button located on

the West side of the Transmitter causes the Collar Re-

ceiver to Vibrate. Pressing the button located on the East

side of the Transmitter causes the Collar Receiver to Vi-

brate for .5 seconds. After .5 seconds, Continuous Stimu-

lation will be applied simultaneously with the Positive Vi-

bration.