SUPER TRAINERTM EZT SERIES Electronic Dog Trainer Owner’s Manual • • • • • • • • EZT 1000 EZT 1002 EZT 1003 EZT 2000 EZT 2002 EZT 2003 EZT 3000 EZT 3002 D.T. SYSTEMS, INC.
Congratulations and Thank you for purchasing our EZT Super TrainerTM training collar. The EZT series represents the absolute latest technological advancement in the Electronic Dog Training World. It offers Maxx-Range™, the industry’s only internally woven antenna in the collar. With up to a 1,200 yard range, they are perfect for hunting, basic obedience and professional training. EZT series collars feature Sixteen levels of stimulation intensity, with an easy ‘no-look’ clicking stimulation dial.
TABLE OF CONTENTS • Introduction ..................................................2 • Table of Contents..........................................3 • Features.........................................................4 • Package Contents..........................................4 • Individual Model Features............................5 • Adjusting and Positioning Your Collar for Proper Fit ............................7 • Parts and Functions.......................................8 • Batteries .
FEATURES Every EZT Super TrainerTM Electronic Dog Training System Features: • Digital Technology • 1,200 Yard Range—(Over 2/3 mile) • Lightweight, Compact Collars (6.7 oz.) and • • • • • • • Transmitters (4.6 oz.) 16 Adjustable Intensity Levels Gentle Touch System™ Extra Mild Stimulation Maxx Range™ Invisible, Embedded Collar Antenna Built in Safety Shut-off Rechargeable Ni-MH Battery System.
INDIVIDUAL MODEL FEATURES EZT 1000, EZT 1002, and EZT1003 • The EZT 1000 features the options of Momentary (Nick) Stimulation, and Constant Stimulation. • The EZT 1002 and EZT 1003 have the same features as the EZT 1000. The EZT 1002 comes with two Collar Receiver units and the EZT 1003 comes with three Collar Receiver units . These Receiver Units are operated from one transmitter. You change from one collar to the other by means of a small switch on the transmitter.
INDIVIDUAL MODEL FEATURES CONT. EZT 3000 and EZT 3002 • The EZT 3000 features the options of Constant Stimulation and Positive Vibration. • The EZT 3002 has the same features as the EZT 3000 and comes with two Collar Receiver units that are operated from the same transmitter. One Collar Receiver is on a black collar and the other is on an orange collar. You change from one collar to the other by means of a toggle switch on the transmitter.
ADJUSTING & POSITIONING YOUR COLLAR FOR PROPER FIT Proper collar tightness and position are very important to insure safety and correct functioning every time you use the collar. • All electronic collars need to be • • • • very snug to work properly. They must be just tight enough to allow the “prongs” or electrodes to make good skin contact. If your collar is too loose, the stimulation may not work properly because good skin contact is not being achieved.
PARTS & FUNCTIONS Transmitter (EZT 2000 shown, models may vary ) 8
PARTS & FUNCTIONS CONT. TURNING ON AND OFF Turning the Unit On: Press and hold the On/Off button on the Collar Receiver. The Red LED Indicator will light solidly for two seconds. Continue holding the Button until the Red light goes off. The unit is now On. The LED Indicator will now flash approximately every two seconds. (Note: The Transmitter is always in a permanent sleep state. It is only On when a button is being pressed, and does not need to be turned off by the user).
INTENSITY LEVEL Intensity Selection Dial The intensity selection dial allows you to choose between sixteen different levels of stimulation, allowing for very precise control. TRAINING INTENSITY LEVEL The first and most important step in training your dog with your EZT Training System is the determination of the correct Intensity Level to provide the proper training stimulation without over shocking your dog. To do this place the Collar on the dog’s neck and turn it on.
PARTS & FUNCTIONS CONT. Transmitter Indicator Light When one of the push button switches on the transmitter are pushed, the RED light will turn on to indicate that the transmitter is being operated. When the battery needs charging the RED light will blink once Two or Three Dog Model Selection Switch (EZT 1002, 1003, 2002, 2003, & 3002) Switching between units can be controlled by moving the toggle selection switch to the desired unit.
PARTS & FUNCTIONS CONT. Remote Training EZT 2000 Series For the EZT 2000 Series, pressing the button located on the West side of the Transmitter causes the Collar Receiver to Vibrate. Pressing the button located on the East side of the Transmitter causes the Collar Receiver to Vibrate for .5 seconds. After .5 seconds, Continuous Stimulation will be applied simultaneously with the Positive Vibration.
BATTERIES All EZT Super TrainerTM training collars are equipped with rechargeable Nickel Metal Hydride (NiMH) batteries. NiMH batteries are not memory sensitive and do not require depletion before recharging. The batteries come partially charged from the factory. It is, however, recommended that you give the battery a full charge before the first use. This takes about 12 hours. Remember - Always keep batteries away from flammable substances (especially when charging).
TESTING There are three methods you can use to test your EZT Super Trainer™ depending upon your model’s features. First, you should make sure that both units are fully charged. Then turn on the power to the collar receiver. Next, follow these steps: To Test the Electronic Stimulation: A) Place the tester firmly on the electrodes of the collar receiver. B) Set the intensity (Note An intensity level setting of 4 or less might not be enough to light the tester). C) Push either the ‘NICK’, ‘STIMU’, Red buttons.
TESTING CONT. To Test the Vibration: A) Follow the directions for testing the Electronic Stimulation, and press the button located on the west side of the transmitter. B) If you press the button on the East side of the transmitter, the unit should vibrate for .5 seconds and then the tester should light. If you press the button on the West, the unit should vibrate but the tester should not light.
IMPORTANT SAFETY NOTES CONT. • The electrodes on this collar are made with high grade stainless steel to help prevent any chemical or allergic reactions with your dog’s skin. • To prevent neck irritation, the collar should never be worn for more than 12 hours a day. Changing the collar location on the dog’s neck daily will also help prevent irritations. It is important to keep the collar clean. Clean the electrodes regularly with a mild anti-bacterial soap.
WARRANTY D.T. Systems Premium Lifetime Warranty is the best warranty offered in the industry. This warranty is free to participating U.S. customers. (The warranty registration card must be returned within 30 days of original purchase). This changes our normal one year parts and labor warranty to a lifetime warranty against manufacturing defects on parts and a one year warranty on labor. What is covered: D.T.
WARRANTY How the Limited Lifetime Warranty works: • To qualify for the Warranty you must fill out the warranty registration card which came with your system and mail it (with your original sales receipt) to D.T. Systems within 30 days of purchase. • There is no charge for parts or labor for the first year on any of our lifetime warranted products.
D.T. Systems, Inc. 2872 Walnut Hill Lane Dallas, Texas 75229 Tel: (214) 350-9446, (888) LUV-U-DOG Fax: (214) 350-7847 Website: http://www.dtsystems.com E-mail: customerservice@dtsystems.
