Owner`s manual

There are two or three methods you can use to test your

SUPER PRO @LITE TRAINERTM

depending upon your model's features.

First, you should make sure that both the transmitter and

receiver are

hlly charged. Then,

turn

on the power to the

Collar Receiver. Next, follow one of these three steps:

To Test the Electronic

Stimulation:

A) Place the tester firmly on

the electrodes of the Collar

Receiver.

Set the intensity (Note -

intensity level setting of

less might not be enough to

light the tester).

C) Push one of the training but

tons.

The tester light will quickly

flash once for the Nick Stimulation and light steadily when

the Constant Stimulation, Jump Stimulation, or Rise

Stimulation button is pushed (the higher the intensity, the

brighter the test light).