Owner`s manual

TURNING YOUR UNIT ON

OFF

Turning the Unit On:

Press and hold the Power button

on the Collar Receiver. The red

LED will flash for approximately

seconds. You may release the

Power button at any time while

the red LED is flashing. The unit

is now ON. The LED indicator will now flash approxi-

mately every

seconds.

(Note: You can turn on the Transmitter by pressing any

button on the transmitter. When the transmitter is turned

on, the backlight will light for

seconds and then go into

power save mode. In this mode, you will be able to see all

the indicators and icons, but the backlight will be turned

off.)

Turning the Unit Off:

Press and hold the Power button. The red LED will flash

for approximately

seconds. You may release the Power

button at any time while the red LED is flashing. The unit

is now

OFF.

(Note: Because of the power save mode, the Transmitter

will turn off after one hour. When the LCD display is on

and has visible

markings, it can be manually turned off by

pressing the "Intensity

Up"

and "Intensity Down" buttons

at the same time for more than

seconds.)