Specifications

Getting to know your DTS-4
Your DTS-4 is a quality, precision instrument that will give you many years of outstanding
service; take a few minutes to get to know it. On the front panel there are four buttons and four
LED indicator lights. The four buttons select the four antennas connected to the rear ports.
Pressed in pairs, they select special functions.
The red LEDs show which antenna is presently selected. For special functions, they blink in
groups of two or four.
On the rear panel, there are five SO-239 RF connectors. The center connector (TX) is the output
to your rig. The other four go to any coax-fed antenna, or to a dummy load.
3