User manual

8.5 Connecting the In-line Module

Description Connector Connect

Mic Input Balanced XLR Pin 1 : Shield

Pin 2 : Hot +

Pin 3 : Com -

Line Input 1/4" Mono Jack Tip : Hot

Ring : N/C

Sleeve : Ground

NOTE: With special orders, we can increase the pad to 30dB

and the impedance as well, to provide for, switched

balanced mic/balanced line inputs.

Channel Insert 1/4" Stereo Jack Tip : Return

Ring : Send

Sleeve : Ground

Tape Send 1/4" Stereo Jack Tip : -lOdBv

Ring : +4dBu

Sleeve : Ground

Tape Return 1/4" Stereo Jack Tip

Ring

Sleeve

-lOdBv

+4dBu

Ground

Use -lOdBv connections for Fostex type equipment and +4dBu

connections for Studer or Sony Types.

LINE INPUT is used for plugging in the outputs of digital

reverbs, digital delays, drum machines, samplers, keyboards,

CD players, cassette machines or any line level outputs.

CHANNEL INSERT is used to patch (prefade) into the channel,

any signal processing equipment such as compressor/-

limiters, equalizers, etc.

TAPE SEND is used as a summed output of any channel. It will

appear as a direct out of the channel until you push one of

the "from subs" switches. At that time, you send the

subgroup buss that is being sent via the subgroup

assignment switches (just below the channel panpots) to the

input of your multitrack tape machine. (Refer to section

3.5 the Assign and "Subgrouping").