User manual

3.6 Assign Section
3.6.a. channel pan
This control allows you to place the signal anywhere in
the stereo image, which feeds the mix busses or the
subgroups buss assigns.
3.6.b. 1-2
This switch allows you to assign to subgroups 1 & 2.
3.6.C. 3-4
This switch allows you to assign to subgroups 3 & 4.
3.6.d. 5-6
This switch allows you to assign to subgroups 5 & 6.
3.6.e. 7-8
This switch allows you to assign to subgroups 7 & 8.
3 . 6.f. mix
Assigns the channel to the stereo mix busses.
3.7 Channel Section
3.7.a. mute
Breaks the signal flow on the entire channel.
3.7.b. solo
Allows you to hear the channel only on your monitor
speakers in mono prefade listen (pfl) mode or in place
stereo mode, depending on what position the channel to
pfl mode switch
(located on the master section) is in.
15