User manual

A I R E N C E - U S B M a n u a l P a g e 29

SPECIAL OPTIONS FOR EXTENDER MODULES 1 - 6 (PCB AIRENCE-1)

PCB Location JUMPERS DEFAULT DESCRIPTION

J15

J11

J18

Faderstart

Mic Remote

These 3 jumpers change the standard remote

jack on the back of the extender unit from

Fader Start control jack into Studio (Mic) Re-

mote jack. The default setting is Fader start.

When all three jumpers are jumpered to the

right then the remote jack can be connected

to an optional Studio Remote unit.

The above pictured (optional) Studio Remote can be connected to the AIRENCE Extender only to pro-

vide communication from the Presenter to the Studio room with the following possibilities.

1. Switch 1 (Comm)

When pressed the Mic input of the associate channel will be switched from Prog, Sub or Aux

to the Cue buss to be able to communicate with the technician.

1. Switch 2 (Cough)

When pressed the Mic input of the associate channel will be muted, when the presenter need to Cough

or sneeze.

3) Rotary knob

Adjusts the Headphone volume

4) Jack

Stereo Headphone output

5) Audio In

The audio input for the Headphone amplier. Connect with the Announcer output of the Airence mixer.

6) Audio Out

Direct feed trough of the Audio input. To be connected to the next studio remote

7) Remote S1/S2

Switching contacts 1 and 2 connected to the remote jack of the mixer.