User manual

A I R E N C E - U S B M a n u a l P a g e 27
INSERT


The Ring of the stereo jack sends the channel signal and the Tip accepts the return signal.




processors input.

each other and connect to ground (sleeve), this also goes for the other Male XLR, connect the ring of the stereo jack (which
sends signals) to a male XLR pin2. Short here pin 1 and 3 and solder to ground (sleeve). This has to be done because the insert is
not balanced.
See below the cable type you need.
MIC
The Mic input is a professional balanced input circuit with 48 volt phantom powering for condenser mikes which deliver studio-
class microphone quality to your announcer/DJ channel.
JUMPER SETTINGS FOR EXTENDER CHANNELS
