User manual
A I R E N C E - U S B M a n u a l P a g e 26
ON
FADER
room level (or Studio level) will be dimmed by 20dB in case in the input module Mic is selected. At the same
to your needs.
INPUT CONNECTORS 1-6
The level can be set using the gain control to match most source levels.
The shield is to be connected to the ground or case of the RCA Cinch connector.
The Two unbalanced line B input RCA Cinch connectors (stereo inputs) are a second stereo input in this
module to connect even more line level equipment to.
switch via the START connector on the back panel.
back of the mixer. If your turntable only needs a pulse to start, ask your dealer to modify the internal circuit-
*NEVER CONNECT THE MAINS TO THIS REMOTE-JACK*
24 Volts by 50 mA.
Please contact your dealer in case of doubt.