User manual

A I R E N C E - U S B M a n u a l P a g e 23
SETTING UP THE TELCO MODULES
Connect the two wires of the telephone line’s wall connector to the RJ-11
connector labelled wall (LINE) and connect the telephone unit (the one
that has a dialer and handset) to the RJ-11 connec-
tor labelled PHONE. Note that to originate calls, a
local phone must be connected to the AIRENCE, so
you are able to dial a number.
Once the dialed person has taken the call you can
talk to him via the handset and inform him that he
will be in the broadcast soon. You do this by push-



or via your headphone output. If you want some else to talk to him or her also prior

Now the internal hybrid is interfaced (fully balanced) between your telephone ap-

and return signals.

If a local phone is connected, originate a call to a remote site (someone’s phone).
If no local phone is present, someone at a remote site must call you.



Adjust the Gain control to get a good input level from the telephone line.

-
going level to the caller.






from the Hybrid. These adjustments are only required once when installing the AIRENCE.

This is how it is performed:
1. 
wired.
2. 
3. 
4. You will faintly hear the send signal coming out of the mixing console.
5. Adjust the R-Balance for minimum feed through of the mixers send signal.
6. 
7. 
8. 
9. 