User manual
Table Of Contents
- 1 Table of contents1 T
- 2 Package Contents
- 3 Introduction
- 4 System overview
- 5 Control Surfaces
- 6 AXUM Engine
- 6.1 Console 1-4 configuration
- 6.1.1 IP/Clock configuration
- 6.1.2 Global configuration
- 6.1.3 Mix buss configuration
- 6.1.4 Monitor buss configuration
- 6.1.5 Source configuration
- 6.1.6 Extern source configuration
- 6.1.7 Destination configuration
- 6.1.8 Talkback configuration
- 6.1.9 Processing presets
- 6.1.10 Module assignment
- 6.1.11 Module configuration
- 6.1.11.1 Module configuration page
- 6.1.11.2 Module preset 1A/1B, 2A/2B, 3A/3B, 4A/4B
- 6.1.11.3 Processing
- These are the programmed processing defaults for the modules. Depending on the startup settings these processing defaults will be used at startup (programmed defaults in global configuration).The field ‘Use at source select’ determines if the default module processing in the source configuration is used when a source is assigned via the module source select functionality and no processing preset is assigned in the ‘source configuration’.
- The following state/value processing sections are available:
- 6.1.11.4 Routing
- 6.1.11.5 Set module 1 to programmed startup state
- 6.1.12 Mix/monitor buss presets
- 6.1.13 Console presets
- 6.1.14 Surface configuration
- 6.1.15 Rack configuration
- 6.1.16 Source pools
- 6.1.17 Preset pools
- 6.1.18 Users
- 6.2 System configuration
- 6.1 Console 1-4 configuration
- 7 Surface(s) website
- 8 Block diagrams – Must be created
- 9 I/O Rack description
- 10 Available I/O rack cards
- 11 Patch panels
- 12 Specifications AXUM digital audio system
- 13 List Of Figures
- 14 List Of Tables
- 15 Declaration Of Conformity
- 16 Product Safety
- 17 Disclaimer
- 18 Appendix A - Network design for AXUM
- 19 Appendix B – Surface service
- 20 Appendix C – Engine functions
A·X·U·M User Manual Version 2.5 - 2011-01-28
AXUM from D&R - Phone: +31 294 418014 - E-Mail: info@d-r.nl - 86 -
14 List Of Tables
Table 9-1: Frame clock input BNC
........................................................................................................ 63
Table 9-2: Frame clock output BNC
...................................................................................................... 63
Table 9-3: VGA 15p D-Sub connector
................................................................................................... 63
Table 9-4: Keyboard & Mouse mini DIN connector
............................................................................... 63
Table 9-5: USB connector (2x)
.............................................................................................................. 63
Table 9-6: RS232 9pin SUB-D connector
............................................................................................. 64
Table 9-7: Ethernet RJ45 connection
.................................................................................................... 64
Table 10-1: MIC RJ45 connection
......................................................................................................... 68
Table 10-2: Line input RJ45 connection
................................................................................................ 69
Table 10-3: Digital input/output RJ45 connection
................................................................................. 70
Table 10-4: Line output RJ45 connection
.............................................................................................. 71
Table 10-5: CRM output RJ45 connection (A&B)
.................................................................................. 72
Table 10-6: Phones RJ45 connection (C&D)
........................................................................................ 72
Table 10-7: CobraNet RJ45 (Ethernet) connection.
.............................................................................. 73
Table 10-8 Hybrid Rj14 (Telephone) connection
.................................................................................. 75
Table 11-1: MIC patch panel XLR wiring
............................................................................................... 80
Table 11-2: Phones patch panel jack wiring
.......................................................................................... 80
Table 11-3: Line I/O patch panel XLR wiring
......................................................................................... 81
Table 11-4: Standard RJ45 wiring
......................................................................................................... 81
Table 11-5: RJ45 pinning in GPIO-TLL mode
....................................................................................... 81
Table 11-6: RJ45 pinning in GPO-Relay mode
..................................................................................... 82