User manual
Table Of Contents
- 1 Table of contents1 T
- 2 Package Contents
- 3 Introduction
- 4 System overview
- 5 Control Surfaces
- 6 AXUM Engine
- 6.1 Console 1-4 configuration
- 6.1.1 IP/Clock configuration
- 6.1.2 Global configuration
- 6.1.3 Mix buss configuration
- 6.1.4 Monitor buss configuration
- 6.1.5 Source configuration
- 6.1.6 Extern source configuration
- 6.1.7 Destination configuration
- 6.1.8 Talkback configuration
- 6.1.9 Processing presets
- 6.1.10 Module assignment
- 6.1.11 Module configuration
- 6.1.11.1 Module configuration page
- 6.1.11.2 Module preset 1A/1B, 2A/2B, 3A/3B, 4A/4B
- 6.1.11.3 Processing
- These are the programmed processing defaults for the modules. Depending on the startup settings these processing defaults will be used at startup (programmed defaults in global configuration).The field ‘Use at source select’ determines if the default module processing in the source configuration is used when a source is assigned via the module source select functionality and no processing preset is assigned in the ‘source configuration’.
- The following state/value processing sections are available:
- 6.1.11.4 Routing
- 6.1.11.5 Set module 1 to programmed startup state
- 6.1.12 Mix/monitor buss presets
- 6.1.13 Console presets
- 6.1.14 Surface configuration
- 6.1.15 Rack configuration
- 6.1.16 Source pools
- 6.1.17 Preset pools
- 6.1.18 Users
- 6.2 System configuration
- 6.1 Console 1-4 configuration
- 7 Surface(s) website
- 8 Block diagrams – Must be created
- 9 I/O Rack description
- 10 Available I/O rack cards
- 11 Patch panels
- 12 Specifications AXUM digital audio system
- 13 List Of Figures
- 14 List Of Tables
- 15 Declaration Of Conformity
- 16 Product Safety
- 17 Disclaimer
- 18 Appendix A - Network design for AXUM
- 19 Appendix B – Surface service
- 20 Appendix C – Engine functions

A·X·U·M User Manual Version 2.5 - 2011-01-28
AXUM from D&R - Phone: +31 294 418014 - E-Mail: info@d-r.nl - 4 -
10.6 COBRANET IN/OUTPUT CARD 73
10.7 ADAT IN/OUTPUT CARD 74
10.8 HYBRID IN/OUTPUT CARD 75
10.9 FIREWIRE IN/OUTPUT CARD 76
10.10 DSP CARD 77
11 PATCH PANELS 78
11.1 19” PATCH PANELS / BREAKOUT PANELS 78
11.2 WIRING 79
11.2.1 GPIO/Remote 79
11.2.2 MIC 80
11.2.3 Phones 80
11.2.4 Stereo line input and output 81
11.3 STANDARD RJ45 WIRING 81
11.3.1 GPIO TTL/Relay selection 81
12 SPECIFICATIONS AXUM DIGITAL AUDIO SYSTEM 82
12.1 INPUT/OUTPUT CARDS 82
12.2 DSP PROCESSING 83
12.3 OVERALL 83
12.4 DIMENSIONS 84
13 LIST OF FIGURES 85
14 LIST OF TABLES 86
15 DECLARATION OF CONFORMITY 87
16 PRODUCT SAFETY 88
17 DISCLAIMER 89
18 APPENDIX A - NETWORK DESIGN FOR AXUM 90
18.1 NETWORK LEVELS 90
18.2 AXUM NETWORK IMPLEMENTATION 90
18.2.1 MambaNet example 1 90
18.2.2 MambaNet example 2 91
18.3 NETWORK DESIGN (MAMBANET OVER LAYER 2) 91
18.3.1 Practical solution 1: Physical separated switches and IP router 93
18.3.2 Practical solution 2: single managed level 3 switch/router 94
18.3.3 Practical solution 3: Physical separated switches and PCs if IP router 95
18.4 NETWORK DESIGN (MAMBANET OVER LAYER 3) 96
18.5 IP SUBNETS AND IP ROUTES 97
18.6 REMOTE ACCESS 98
19 APPENDIX B – SURFACE SERVICE 99
19.1 PACKAGE VERSIONS 100
19.2 CHANGE PASSWORD 101
19.3 UPLOAD LOGO 102
20 APPENDIX C – ENGINE FUNCTIONS 103
20.1 MODULES 103
20.2 BUSSES 110
20.3 MONITOR BUSSES 112
20.4 CONSOLE 114
20.5 GLOBAL 117
20.6 SOURCES 118
20.7 DESTINATIONS 120










