User manual
Table Of Contents
- 1 Table of contents1 T
- 2 Package Contents
- 3 Introduction
- 4 System overview
- 5 Control Surfaces
- 6 AXUM Engine
- 6.1 Console 1-4 configuration
- 6.1.1 IP/Clock configuration
- 6.1.2 Global configuration
- 6.1.3 Mix buss configuration
- 6.1.4 Monitor buss configuration
- 6.1.5 Source configuration
- 6.1.6 Extern source configuration
- 6.1.7 Destination configuration
- 6.1.8 Talkback configuration
- 6.1.9 Processing presets
- 6.1.10 Module assignment
- 6.1.11 Module configuration
- 6.1.11.1 Module configuration page
- 6.1.11.2 Module preset 1A/1B, 2A/2B, 3A/3B, 4A/4B
- 6.1.11.3 Processing
- These are the programmed processing defaults for the modules. Depending on the startup settings these processing defaults will be used at startup (programmed defaults in global configuration).The field ‘Use at source select’ determines if the default module processing in the source configuration is used when a source is assigned via the module source select functionality and no processing preset is assigned in the ‘source configuration’.
- The following state/value processing sections are available:
- 6.1.11.4 Routing
- 6.1.11.5 Set module 1 to programmed startup state
- 6.1.12 Mix/monitor buss presets
- 6.1.13 Console presets
- 6.1.14 Surface configuration
- 6.1.15 Rack configuration
- 6.1.16 Source pools
- 6.1.17 Preset pools
- 6.1.18 Users
- 6.2 System configuration
- 6.1 Console 1-4 configuration
- 7 Surface(s) website
- 8 Block diagrams – Must be created
- 9 I/O Rack description
- 10 Available I/O rack cards
- 11 Patch panels
- 12 Specifications AXUM digital audio system
- 13 List Of Figures
- 14 List Of Tables
- 15 Declaration Of Conformity
- 16 Product Safety
- 17 Disclaimer
- 18 Appendix A - Network design for AXUM
- 19 Appendix B – Surface service
- 20 Appendix C – Engine functions
A·X·U·M User Manual Version 2.5 - 2011-01-28
AXUM from D&R - Phone: +31 294 418014 - E-Mail: info@d-r.nl - 113 -
Function name
Comments
Object to connect to
Version
Ext 5 off
Deselect Ext 5 for the monitor buss
Switch
2.2
Ext 5 on/off Toggle Ext 5 for the monitor buss Switch
2.0
Ext 6 on
Select Ext 6 for the monitor buss
Switch
2.2
Ext 6 off
Deselect Ext 6 for the monitor buss
Switch
2.2
Ext 6 on/off Toggle Ext 6 for the monitor buss Switch
2.0
Ext 7 on
Select Ext 7 for the monitor buss
Switch
2.2
Ext 7 off
Deselect Ext 7 for the monitor buss
Switch
2.2
Ext 7 on/off
Toggle Ext 7 for the monitor buss
Switch
2.0
Ext 8 on
Select Ext 8 for the monitor buss
Switch
2.2
Ext 8 off
Deselect Ext 8 for the monitor buss
Switch
2.2
Ext 8 on/off
Toggle Ext 8 for the monitor buss
Switch
2.0
Mute Mutes the output GPO, CRM mute 2.0
Dim
Dims the output
CRM level
2.0
Phones level
Controls the level in steps of 0.1 dB
CRM phones level
2.0
Mono Mono the output CRM Mono 2.0
Phase
Phase reverse the right output
CRM Phase
2.0
Speaker level
Controls the level in steps of 0.1 dB
CRM speaker level
2.0
Talkback 1
Talkback to monitor from Talkback 1
Switch
2.0
Talkback 2
Talkback to monitor from Talkback 2
Switch
2.0
Talkback 3
Talkback to monitor from Talkback 3
Switch
2.0
Talkback 4
Talkback to monitor from Talkback 4
Switch
2.0
Talkback 5 Talkback to monitor from Talkback 5 Switch 2.0
Talkback 6
Talkback to monitor from Talkback 6
Switch
2.0
Talkback 7
Talkback to monitor from Talkback 7
Switch
2.0
Talkback 8 Talkback to monitor from Talkback 8 Switch 2.0
Talkback 9
Talkback to monitor from Talkback 9
Switch
2.0
Talkback 10
Talkback to monitor from Talkback 10
Switch
2.0
Talkback 11
Talkback to monitor from Talkback 11
Switch
2.0
Talkback 12
Talkback to monitor from Talkback 12
Switch
2.0
Talkback 13
Talkback to monitor from Talkback 13
Switch
2.0
Talkback 14
Talkback to monitor from Talkback 14
Switch
2.0
Talkback 15 Talkback to monitor from Talkback 15 Switch 2.0
Talkback 16
Talkback to monitor from Talkback 16
Switch
2.0
Audio level left
Left audio level of a monitor buss
Level meter
2.0
Audio level right Right audio level of a monitor buss Level meter 2.0
Audio phase
Phase between left and right of a monitor
buss
Phase meter
2.3
Label
Name of the monitor buss
Display
2.0
Select 1
When monitor buss select for console 1 is
activated the current monitor buss will be
selected
meter-selector
2.3
Select 2
When monitor buss select for console 2 is
activated the current monitor buss will be
selected
meter-selector
2.3
Select 3
When monitor buss select for console 3 is
activated the current monitor buss will be
selected
meter-selector
2.3
Select 4
When monitor buss select for console 4 is
activated the current monitor buss will be
selected
meter-selector
2.3