Before starting… 시작하기 전에... 1. This user manual may be changed without notice in accordance with improvements to the product or changes in available functions. 2. This user manual has been prepared based on information available at the time of publishing and may have technical or editorial errors or omissions. 3. The screen and shape of the product in this manual may differ from that of the actual product. 4. All the content of this manual is protected by Copyright Law. 5.
Consent Regarding Copyright and Use... 1. All the contents in this manual and PDA software are protected by Copyright Law and all the rights belong to DOTel Co., Ltd. 2. No part of this manual may be duplicated, renovated or translated into other languages without prior written consent. The act of duplicating, correcting or distributing this manual without permission is a crime punishable in accordance with Copyright Law. 3.
Table of Contents 1. Important Notices. 2. Before Using 2.1 Package Contents 2.2 Button Layout and Physical Features 2.3 Connection to a PC 3. Additional Functions 3.1 Wireless LAN 3.2 Bluetooth 4. Problem Solving and Warranty 4.1 4.2 4.3 4.4 4.
1. Important Notices: Proper Usage and Battery Care Be sure to carefully read this user manual, as not observing the cautions may cause injury of the user or other persons, or damage to property. !! The manufacturer and seller do not take any responsibilities for any and all accidents due to not observing the cautions specified in this manual. This product should be used only for the established purpose. Do not use the product for other purposes than those specified in the user manual.
1. Important Notices: Proper Usage and Battery Care !! When using USB cable and adapter be careful with the direction of connector insertion If it is inserted incorrectly it may cause a problem with the PDA or PC. Ensure the cable used is in good condition not having bent pins or damaged areas along the cord. The product may not operate properly in extreme cold or heat. The proper operating temperature is between -10℃ ~ 50℃.
1. Important Notices: Proper Usage and Battery Care !! Do not paint or attach stickers to the product, especially if those paints or stickers contain metal ingredients. It may cause buttons not to operate or reception problems. Do not use any power adaptor with this product except the one provided. Provided adaptor Model : KSAFE0500400W1UV-1 / Manufacturer : Kuantech(Shenzhen)Co.
2. Before using 2.1 Package Contents ………………………………………………………………… Basic Components Two Standard Batteries Device Micro USB Cable A/C Adapter Cradle Manual Touch Film CD Stylus Pen Additional Components Leather case Notice The specification and components of this product may change According to the situation of the manufacturer.
2. Before Using 2.2 Button Layout and Physical Features ……………………………………………………………….
2. Before Using 2.2 Button Layout and Physical Features ………………………………………………………………. Button Functions Button Function Function Key1 Function Key2 Function Key3 To turn on/off the product, pressing and holding the power key for three seconds. To turn on/off the LCD while the device is on, pressing the power key. Used to reset the product to reboot it when a problem has occurred during use.
2. Before Using 2.2 Button Layout and Physical Features ………………………………………………………………. Power connection and charging 1 2 Connect the device to the cradle. Connect an adapter to the back of the cradle. 3 While charging, the red LED light will be on. When charging is complete, light will turn green. Battery charging and using time Notice Standard Battery Charging time About 3 hours Standby time About 500 hours - The Charging time is calculated based on using the proper charging cradle.
2. Before Using 2.3 To connect with a PC ………………………………………………………………. To install Active Sync 1 2 Agree with the license for Microsoft ActiveSync. Select ‘Agree’ and press ‘Next’ 3 4 In order to connect (synchronize) the PDA with a PC, Microsoft program called ActiveSync is required. For installation, execute ‘Install Program’ and press ‘Next’. At this time the PDA and PC should not be connected.
2. Before Using 2.3 To connect with a PC ………………………………………………………………. To install Active Sync 5 6 Installation of ActiveSync will be performed. It may take several minutes depending on the environment of the user PC. 7 8 ActiveSync is now ready to install. Execute Installation by pressing ‘install’ Now, connect the PDA with the PC Using the cradle.
2. Before Using 2.3 To connect with a PC ………………………………………………………………. To install Active Sync 9 10 ‘Found New hardware wizard’ will start. Select ‘Yes, connect whenever a device is connected’ and press ‘Next’ ‘Generic USB Serial’ is found . Select ‘Install at listed or specific location’ and press ‘Next’ 11 12 Press ‘Next’ after finding the driver file by pressing ‘Browse’ A driver adequate for PDA will be installed.
2. Before Using 2.3 To connect with a PC ………………………………………………………………. To install Active Sync 14 15 Once the installation of the driver has been completed. Press ‘Finish’ Installation of ActiveSync has been completed and synchronization will start.
3. Functions 3.1 Wireless LAN ………………………………………………………………. Wireless Manager It can be controlled by pressing on or off as shown in the figure above after selecting ‘Start’ -> ‘Program’ -> ‘WiFi’ from the tool bar at the bottom of Windows wallpaper. WLAN on/off state is maintained even after the system is rebooted.
3. Functions 3.2 Bluetooth ………………………………………………………………. Bluetooth Use this menu to activate or deactivate Bluetooth function. Bluetooth function can be used only after turning the module on by pressing ‘Bluetooth On’ button. When Bluetooth function is not being used, the function should be turned off by pressing ‘Bluetooth Off’ button In order to extend the battery life. Place the Bluetooth device within 10meters of this equipment. Press “search Device” button.
3. Functions 3.2 Bluetooth ………………………………………………………………. Bluetooth When the window asking to enter the pin code pop up, enter the pin code and press “Confirm”. Each Bluetooth device has a unique pin code which is used for certification. Check the pin code with the manufacturer of The Bluetooth device. If ‘Registered Device List’ Window appears with a popup window informing that connection is made, connection is successfully achieved.
3. Functions 3.2 Bluetooth ………………………………………………………………. Bluetooth Press “Registered Device List” button. Press ”Connect/Transmit” button after selecting the item which has been connected before from the “Registered Device List”. A popup window will appear to inform that the connection is made and connection status will be displayed in the status blank of the list. In case connection has not been made, start from the step #1 again. In order to disconnect the device connected, press “Disconnect” button.
3. Functions 3.2 Bluetooth ………………………………………………………………. Bluetooth The Device Information screen shown information about Bluetooth device such as device name, device ID (BD address), support profile, Bluetooth version, firmware version and software version. In order to delete a device once connected, press “Delete” button after selecting the item to be deleted. A device currently connected cannot be deleted. Delete the list after disconnecting the device.
4. Problem solving and Warranty 4.1 Problem solving ………………………………………………………………… Problem solving 1. Check followings first when a problem occurs while using the product. If the problem is still not solved, first contact the dealer you bought from. 2. In case of the delayed response, you can reach the manufacturer. DOTel’s Customer service Phone No. : +82-2-850-3243 Problem Product does not turn on. Solution 1. When the product is shipped from the factory, the circuitry is disconnected.
4. Problem Solving and Warranty 4.1 Problem solving ………………………………………………………………… Problem Solution 1. This product is designed to properly radiate the heat generated inside the product through the case. The product seems to be hot. The PC does not recognize the product. 2. If the product is used for a long period of time or the adapter is connected for long, you may feel warmth from the case please use the product at ease as there is no problem with the product. 1.
4. Problem Solving and Warranty 4.2 Customer support information ………………………………………………………………… 1. Contacting the customer service center 1) Web site - Before contacting customer support you may wish to try to find troubleshooting help at our website : www.dotel.co.kr - Click ‘Contact’ on the DOT website. - Fill in the form and click the ‘submit’ button. 2) Content of service Free or charged repair of all the models of PDA and sale of various accessories. 2.
4. Problem solving and Warranty 4.2 Contacting Customer Support ………………………………………………………………… 3) Warranty period - Main body : 1 year - Accessories (consumables) : 6 months (battery and items excluding the main body) - Mandatory period to keep spare parts in stock : 3 years from the date of releasing the relevant model.
4. Problem Solving and Warranty 4.3 Product Warranty …………………………………………………………………. Product Warranty Classification Model name Content DOTH-500 Date of purchase Purchased from Manufacturing No.
Classification Content Frequency used: WLAN - 802.11b/g: 2412 ~ 2462 MHz Modulation - BPSK / QPSK/CCK/ 16- QAM/ 64-QAM Bluetooth Frequency used: 2402 ~ 2480 MHz Modulation : GFSK Note This device use already certified module (TX Module FCC ID: TWG-SDCMSD30AG) The TX module was certified with both 2.4G and 5G bands but this device only uses 802.11 b/g mode of 2.4G band and the TX module is limited to operated 2.4G b/g mode only.
4. Problem solving and Warranty 4.5 Product Specifications …………………………………………………………………. Product Specifications Classification Content CPU ARM 11 / 800MHz O Windows CE5.0 S RAM 128MB ROM 256MB DISPLAY INTERFACE TFT LCD MODULE 5.01INCH,262K COLOR with Touch screen panel USB 2.0 (Micro USB) BATTERY Standard type : 2800mAh SIZE 149(L)*86(W)*17.
