User's Manual

DOT400 User Guide -

PC Connection

You can set PC connection to synchronize DOT 400 with your

desktop PC or other devices. You can set PC connection between

desktop PC with USB, infrared port, and serial port. To change PC

connection, follow these steps:

1. Select Start > Settings > Network, and create a new connection.

Select Direct connection in the connection type. For details, see

“Network and Dial-up Connections”

2. Select Start > Settings > Control Panel > PC connection.

3. Tap Change Connection.

4. Select a desired connection type.

5. Connect to a desktop PC.

Dto connectt your DOT 400 to a dektop PC, Microsogt ActiveSync

3.5 must be installed on the on the desktop PC.