User's Manual

DOT400 User Guide -

Stylus Pen

You can set the sensitivity and calibration of the LCD screen.

Double-tap

You can set and check the sensitivity of double-tapping.

To set the double-tap sensitivity:

1. Select Start > Settings > Control Panel.

2. Run Stylus and select the Double-tap tab.

3. Double-tap the grid. The color of grid will change.

4. The speed and area of Double-tap is automatically recorded.

To test the double-tap sensitivity:

1. Select Start > Settings > Control Panel.

2. Run Stylus and select the Double-tap tab.

3. Double-tap the icon below. The icon will change.

4. If the icon doesn’t change, adjust your setting using the grid

above.

Calibration

If your DOT 400 is not responding properly to your taps,

recalibrate your screen using Recalibrate.

To start the re-calibration:

1. Select Start > Settings > Control Panel.